wear resistant ceramic adhesiv > industrial ceramic wear resistant bonding & epoxy adhesive

industrial ceramic wear resistant bonding & epoxy adhesive

BD121N industrial ceramic wear resistant bonding and epoxy adhesive

Product name:
BD121N ceramic bonding ceramic type wear resistant epoxy ceramic tile adhesives

Product description of abrasion resistant industrial ceramic epoxy bonding adhesive:
Use the inorganic high temperature resistant adhesive to bond the ceramic lining plate on the steel plate surface of equipment inner shell directly,
through heating for curing to form the strong wear abrasion resistant coating.

Performance features:
This product is not aging for a long-term running under the high temperature environment of below 350 deg C,it doesn’t fall off.

Range of application:
It is widely used in doing the wear resistant lining for the pipeline equipment of wind power conveying powder,such as the cement plant
pulverized coal transmission pipeline,thermal power plant coal pulverizing system,coal mill outlet pipeline and fan impeller etc.

Product specification:

Projects Models	TCM-PS-1	TCM-PS-2
Ceramic tile size(mm)	17.5 X 17.5 X 17.5	20 X 20 X 5
Lining plate size(mm)	250 X 250 X 5	250 X 250 X 5
Packaging(piece/carton)	16	16

Abrasion resistant corundum ceramic porcellanic index:
Hardness(HRA) ≥ 85
Compressive strength(Mpa)             ≥ 850
Volume Density(g/cm3) ≥ 3.5
Wear resistance(g) ≤ 0.0005
(P=74N,n=800,t=30 min)

Rubber lining plate technology index:
Tensile strength (Mpa) ≥ 13
Elongation at break (%) ≥ 300
Rate of the permanent deformation (%) ≤ 30
Shore-A hardness 60-70
The bonding force between rubber and ceramic (Mpa)    ≥ 3
The adhesion between lining plate and metal (Mpa) ≥ 2.8

Adhesive technology index:
Appearance: Grey and yellow
Shear strength:
(Curing under water) ≥10 Mpa
(Room temperature curing)             ≥15 Mpa
(150 deg C curing) ≥16 Mpa

Product photo of BD121N ceramic bonding ceramic special abrasion resistant epoxy adhesives:

------分隔线----------------------------